The opinions expressed herein are my own personal opinions and do not represent
my employer's view in any way.
So, I have experienced what I feel is a failure of a project that I was recently a part of in my personal life and have been thinking about it a lot lately. Partly because as an systems architect it is my job to always be trying to understand where I can improve myself and ensure that I do not repeat mistakes, but also just because, well darn it, I hate failing.
Who the heck doesn’t hate failing?
Really, I am not counting this as a ‘failure’ per-se because I did bring it up as an issue at the onset of the project and even noted my personal objections to it in the review notes that were taken in the meetings I had. I am noting it as a time of shame in that I allowed my PERSONAL level of professional conduct to be driven by an outside group instead of recusing myself and just walking away. In short, I let go of my principals and am now paying for it.
Not a mistake I will be making again.
How did I come up with the title of this entry? What does a QA analyst have to do with the legal system? Just so you know I am a huge fan of the TV series Law an Order. Not so much the recent off shoots, but the old shows with Jerry Orbach (Lennie Briscoe), Sam Waterston (Jack McCoy), and one of my personal favorites, Chris Noth (Mike Logan), but I digress…
I have always been fascinated by the law. I almost decided to become a layer ate one point but decided that I was not hard enough (or perhaps too hard) to take the role. I looked at it for a while and decided that there were potentially too many gray areas to have to deal with ethically, so I took the IT route instead. Hehehehehe, yeah, who knew?
So, the relation here is this.
In the legal system you have several areas of a legal issue, each on represented by a specific area of expertise looking at the case in a different way. The accused is, by matter of the same legal system that is currently citing them as a ‘bad guy’ provided a way to prove their innocence before a panel of impartial people, and is offered representation to help them. There are people on both sides that defend their position, present their case and in the end the judge and jury make a decision based upon a preponderance of the evidence if the accused is guilty or innocent, and what the method/mode of punishment should be. Remember, the legal system is represented by the scales held by lady justice’s left hand with a sword in her right, and her eyes covered with a blind fold giving the indication that she is unable to be influenced by any outside party, and are driven only by the written matter of law currently established.
In the project system you have several areas of a project issue, each on represented by a specific area of expertise looking at the problem in a different way. The project is what it is, being defined by the specifications that were approved by all the parties involved upon its initiation. There are people on both sides that defend their position, present their case, and in the end someone makes a decision if the delivered system met the requirements or not, and how to correct what needs to be corrected moving forward.
In a business environment, the business owner comes to IT with a need. They understand (probably very well) what needs to be accomplished and can usually state those goals very well in what are referred to as High Level Requirements. These requirements are used to establish a baseline timeframe and budget that is then referenced by the business plan to check validity to the established mission and cash flow for the year to determine if it can be(or even should be) perused. Once they get the green light it moves on.
In the IT environment an architect is assigned the project, provided the business requirements, a basic timeline and a budget framework and told to go off and design, then come back with more specifics to move forward. Once they do the design and pass it back to the company for final approval (timeline and budget) the project then gets assigned to developers to complete according to the specification.
The developers do the work based upon the design of the architect; perform some base level tests to make sure that what they release meets the stated objectives, and then release a build for testing.
Here is where the problem ALWAYS happens.
The business will sometimes NOT want to include a QA test resource.
WHY? I am not sure. Usually the business says that they are too busy to be bothered with anything. They are, after all, the ones making the money for the company, why should they want to do anything else? But I have heard more than a few times that THEY want to be the test people on the project because THEY know the DATA better than ANYONE and can be the best judge of the system processing quality than a QA persona can ever be.
It was HERE where I was bitten.
I fought hard and lost my battle. I was made to allow this abomination into my project. I was provided with the business requirements, I created the low level design, handed that off to developers that created their individual designs and had them reviewed by other developers, then implemented them long with a series of basic test cases that they deemed were required, and then handed the ‘completed’ project over to the business for THEM to test. The business ran their TESTS (I have yet to see an established – IE: written – test plan or results document) and signed off on the completed work. The total time for QA testing ended up being about 4-6 hours.
My right eyebrow rose a bit but it was apparently not for me to say anything and the project went into production where it was run for the first time and the resulting data set was sent off to the next step of the process (not something that I have any control over at all there), and within hours THEY saw issues in the data that they were presented with as a result of this projects processing and kicked it back to us. The business took a look at the data (that they already saw by the way, remember, they ‘QA Tested’ this system just hours before and had ‘signed off’ –approval via email- on its viability and correctness).
The reaction was shocking to say the least. The business came back and questioned the systems correctness. I was shocked, but not at all that surprised, but still a bit ticked off. I am not a person that enjoys assigning blame, but when I am asked to explicitly locate a problem, that job gets done for me. I find the error and the fault is assigned by the simple act of doing that. Who did that work gets the ‘blame’. In my opinion though the blame should be shared by the developer and the person that did the review of the code, and ALSO the QA Analyst that either missed a test case or did not execute one correctly. In this case we had NO QA Analyst, or in reality, I was getting asked BY THE QA Analyst (the business unit in this case) what the problem was. Again, I was a little miffed, but took it. The problem ended up being something that I knew was going to be a potential issue, and that we had even discussed in meetings as part of the implementation and design. A direction was decided upon between me and the PM that the business (err… QA) would manually process through this data list and perform some further cleanup that would take a significant effort in dollars, time and specialized software to accomplish in an automated manner, and that we would look at other more automated solutions in the next round prior to this process needing to be used again next year. Being the diligent architect that I am kept this all documented in the projects documentation, partially because I am just a thorough person, but also as a way to provide some CYA to both myself and the next unlucky architect that got any revisions the next time this project needed to have changes made to it.
The manual processing was done, requiring the business to manually look through every record and try to remediate possible duplicates. I figured this would FORCE them to look at each and every record and if there were any OTHER errors they would see them. They were after all ‘the best people to judge the correctness of the data’ hence the reason that they mandated themselves as the QA team in the first place. I again, shook my head, scratched a bit, and let it go. They completed their manual processing, removed about 1000 or so records that they felt were dupes and handed the file back to me to get converted over and sent back to the vendor for processing. That being done, the project was run, my involvement was closed out, and I was assigned on to other work.
Ding dong, the alarm bell rings again as a new problem is found, and then another.
Once again I am asked to look at the data. Amazingly enough, I am asked by the same team that certified this exact same data, and even had to read through it all manually record by record in their last cleanup effort, to find the ‘problem’. I found the problem, a common mistake in this type of processing (the order that records are placed in when a lookup is performed) that was not caught by the developer, the reviewer of their code, nor the QA team that certified the data TWICE now before it was allowed out the door.
So, what’s the result here? I am going to spend my weekend looking over the data between what we HAD then and what we HAVE now as the result of a change made to address the issue and try to determine what to do next.
Being a process oriented guy and always one to try to learn from my mistakes I have taken a hard look at this and made a determination that I was right at the start and I am not going to ever accept a project that does not have QA resources assigned. Could I be potentially signing my own walking papers? Perhaps, but at this point it is a case based upon principles and not just me being a whiney architect not willing to take blame. In fact all I have been asking all along is that someone who is impartial to the business process, design of the solution, and the development of the solution look at the data going in, the processing, and the data coming out, and TELL ME if there are problems.
I welcome being told there is a problem so it can be addressed BEFORE we ship. That’s the idea of testing, to catch problems before they make it to production. I just fail to see how people cannot understand that. Just as Lady Justice stands outside of every courthouse to ensure fair and impartial judgment on the application of the rules of law, so should QA be allowed to stand and judge the usability of a system before it is relied upon to perform its tasks.
Now I ask you, how many people ASK to be judged like this?
Am I wrong?